Published at Saturday, April 07th 2018. by Rubina Sibilla in Fishing Reels.
Fill Your Reel Just Right. When using a baitcasting reel filling the spool to 90 percent capacity is recommended. This optimizes casting performance. Too much line is likely to increase the chance of backlash while not enough limits casting distance. For spinning reels a good rule of thumb is to fill the spool until there′s at least 1/8 inch of room from the line to the edge of the spool lip. That will let you use the most line capacity without causing line to spring off the spool and form tangles. The 1/8-inch rule applies to spincast reels too but you′ll have to remove the reel′s front cover so you can check the amount of line on the spool.
Proper Brake Adjustment Equals Fewer Backlashes. You′ll make more accurate casts with fewer backlashes if you adjust your baitcasting reel′s mechanical brake according to the weight of the lure you′re casting. Look for the brake adjustment knob on the side-plate beneath the handle. With the lure attached to your line depress the free-spool button while lightly thumbing the line. When the brake knob is properly adjusted the lure should descend slowly to the ground and stop without any spool overrun. If the lure falls too quickly or slowly adjust the brake knob to compensate.
Use tweezers to handle springs and wire clips. "That'll keep them from flying all over the place and maybe getting lost."
When you′re on a hot bite or a long-planned trip the worst thing that could happen is tackle failure. Losing a great catch due to something that could have been prevented is annoying. Avoid that problem by maintaining and regularly servicing your spinning reels and you′ll enjoy years of dependable use. Here are some steps to keep those reels in good working order.
Proper Lubrication. Proper reel maintenance includes lubricating all moving parts such as bearings spool spindles and gears. You should lubricate lightly however and do not use heavy oil or grease. These can gum up or leave a residue that can inhibit movement of the bearings and other close-tolerance parts. Fine light lubricants such as Rem Oil or Blakemore′s Reel Magic Lubricant are excellent choices. Despite advice you may get to the contrary do not use WD-40 or Vaseline to lubricate any of your reel parts. These work well for many applications but they′re not good for reels. Most manufacturers recommend that you re-lubricate your reel on at least a monthly basis – more often with heavy use. At the very least lubricate everything once during each season you′ll be fishing.
Any content, trademark’s, or other material that might be found on the simontonauto website that is not simontonauto’s property remains the copyright of its respective owner/s. In no way does simontonauto claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
Copyright © 2018 simontonauto. All Rights Reserved.