After a day of fishing rinse each of your reels with fresh water and allow to dry. Don′t use a spray nozzle to do this however. High-pressure water can force sand dirt and salt into the reel. Use light pressure straight from the hose.
Hold your reel properly while disassembling and assembling it. "We recommend anglers hold the reel in their left hand and work with their right. That way everything stays oriented. But the really important thing is to always hold it the same. That way the parts
Before rinsing tighten down the drags especially on spinning reels. This will help keep water from seeping inside. Hold spinning reels upside down with the drag toward the ground when rinsing giving water even less of an opportunity to get inside the reel.
Baitcasting Reels: These reels work with the weight of your bait or lure as it pulls on the line and turns the spool. They are typically preferred by more experienced anglers especially when using heavier lures and lines for large game fish. Handles are usually
Some of my fishing buddies like me have invested a lot of money in the fishing reels they own. With few exceptions though these guys rarely treat their reels like the expensive finely tuned pieces of equipment they are.
After all that put your reel back together; check to make sure everything is working the way it should back the drag off and apply a little Reel Magic to the exterior to protect the finish and line. You'll be good to go. Spinning reels
It′s not unusual to see their tackle banging around in the back of a pickup going down a dusty road or stored in a boat locker without being washed after a day fishing in saltwater. I often see reels spooled improperly drags set incorrectly and
Line Replacement. When should you replace old line with new? There′s no set answer to that question but certainly you′ll want to replace it after any long taxing encounter with a hard-fighting fish which can compromise the properties of the line. I also replace mine
Take your reel apart properly. "When you take your reel apart lay out the parts on a mat of some sort. Put a strip of masking tape under the line of parts and number each part as you remove it from the reel. That way
Any content, trademark’s, or other material that might be found on the simontonauto website that is not simontonauto’s property remains the copyright of its respective owner/s. In no way does simontonauto claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
Copyright © 2018 simontonauto. All Rights Reserved.