Outside of situations like those just keep an eye on your line and change it out when it fades frays or doesn′t feel as supple as it was when new. Like maintaining a reel keeping good-quality fishing line on your reels is key to your
Proper Lubrication. Proper reel maintenance includes lubricating all moving parts such as bearings spool spindles and gears. You should lubricate lightly however and do not use heavy oil or grease. These can gum up or leave a residue that can inhibit movement of the bearings
Before rinsing tighten down the drags especially on spinning reels. This will help keep water from seeping inside. Hold spinning reels upside down with the drag toward the ground when rinsing giving water even less of an opportunity to get inside the reel.
Use tweezers to handle springs and wire clips. "That'll keep them from flying all over the place and maybe getting lost."
Remove or secure your fishing line before you remove the spool. "Either strip all the line off the spool or secure it with masking tape before you remove the spool from the reel. If you don't the line will get caught between the spool and
Each reel is a little bit different but the basics are the same. Here are the elementary steps the Kilpatricks recommend to keep your reel working properly.
There are three types of drag systems : 1. Spring and pawl or “click and pawl” systems feature a spring that pushes the prawl into a gear on the reel spool to produce a drag. Spring and pawl is best for light fishing when targeting
Start each trip with a thorough cleaning. Gently rinse each reel to remove salt particles. Don′t loosen the drags yet and don′t use a lot of water pressure either to prevent forcing salt and dirt into internal components. If possible wash reels with warm soapy
Oil bearings. "Clean bearings with lighter fluid. That'll remove all the dirt and grunge from them. After they're cleaned make sure they spin. That's very important because it'll tell you they're clean. Oil them with TG's Rocket Fuel — medium viscosity — one drop per
Lubrication is an essential part of spinning reel maintenance. Use the oil that came with the reel or a quality after-market brand. Ball bearings and metal bushings tend to collect water and salt leading to corrosion and seizure if not oiled. It′s difficult to crank
Any content, trademark’s, or other material that might be found on the simontonauto website that is not simontonauto’s property remains the copyright of its respective owner/s. In no way does simontonauto claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
Copyright © 2018 simontonauto. All Rights Reserved.