Published at Sunday, April 08th 2018. by Juliane Pia in Fishing Reels.
Before rinsing tighten down the drags especially on spinning reels. This will help keep water from seeping inside. Hold spinning reels upside down with the drag toward the ground when rinsing giving water even less of an opportunity to get inside the reel.
After cleaning components are inspected before reassembly. If a part won′t endure a complete season it needs to be replaced. Items subject to normal wear and tear like plastic drag knobs are checked for stress cracks. Drag washers typically last a couple of years depending on use; a shiny or worn one needs to be replaced immediately. Technicians also know whether to lube the drag washers. Certain drag material requires lubricants to work properly while others are designed to stay dry and grease-free. Keep your spinners spinning smoothly and they won′t let you down when that drag starts screaming.
Spincast Reels: With these reels the line comes off the top of the spool while casting. The spool which runs parallel with the rod remains enclosed by a cover that features a port where the end of your fishing line exits the reel. The spool remains stationary until you use a thumb button to cast. As you release the button your bait or lure will propel your line. The ease of spincast reels makes them a good choice for novices. They′re reliable and lack complexity.
Line Replacement. When should you replace old line with new? There′s no set answer to that question but certainly you′ll want to replace it after any long taxing encounter with a hard-fighting fish which can compromise the properties of the line. I also replace mine after extended fishing time in waters with lots of rocks snags and other debris that can cause nicks and abrasions. And of course it′s time for more line whenever the amount on the spool gets too small due to changing lures losing baits to snags cutting off line because of “twisties” and so forth.
Baitcasting Reels: These reels work with the weight of your bait or lure as it pulls on the line and turns the spool. They are typically preferred by more experienced anglers especially when using heavier lures and lines for large game fish. Handles are usually located on the right-hand side of the reel. Most baitcasting reels incorporate a drag system which adjusts the resistance or drag on your spool and controls the level of resistance needed to pull the right length of line off the spool many anglers prefer baitcasting reels for larger stronger game fish like musky or smallmouth bass particularly if they′ll be out on the water for an extended period of time. Many saltwater anglers also use baitcasting reels for species like striped bass some baitcasting reels come in one-piece designs that lessen the corrosive effects of saltwater.
Any content, trademark’s, or other material that might be found on the simontonauto website that is not simontonauto’s property remains the copyright of its respective owner/s. In no way does simontonauto claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
Copyright © 2018 simontonauto. All Rights Reserved.