Published at Monday, March 26th 2018. by Juliane Pia in Fishing Reels.
Remove or secure your fishing line before you remove the spool. "Either strip all the line off the spool or secure it with masking tape before you remove the spool from the reel. If you don't the line will get caught between the spool and the frame and make removal very difficult."
Use tweezers to handle springs and wire clips. "That'll keep them from flying all over the place and maybe getting lost."
It′s really not difficult or time-consuming to give your reels the TLC they need to perform well every time you go fishing. Nor is it difficult to learn basic usage tips like how to properly replace line or adjust the brakes to stop backlashes.
Grease gears. "Apply grease to the bottom of the teeth not the top. Applying grease to the tops of the teeth will cause the gears to throw the grease everywhere. You want it in the bottom. Also don't slop the grease all over the place; a light coating is all you need. We apply it with a toothpick or a small brush."
Proper Brake Adjustment Equals Fewer Backlashes. You′ll make more accurate casts with fewer backlashes if you adjust your baitcasting reel′s mechanical brake according to the weight of the lure you′re casting. Look for the brake adjustment knob on the side-plate beneath the handle. With the lure attached to your line depress the free-spool button while lightly thumbing the line. When the brake knob is properly adjusted the lure should descend slowly to the ground and stop without any spool overrun. If the lure falls too quickly or slowly adjust the brake knob to compensate.
Any content, trademark’s, or other material that might be found on the simontonauto website that is not simontonauto’s property remains the copyright of its respective owner/s. In no way does simontonauto claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
Copyright © 2018 simontonauto. All Rights Reserved.