Published at Tuesday, April 10th 2018. by Evdokiya Lidiya in Fishing Reels.
Proper Lubrication. Proper reel maintenance includes lubricating all moving parts such as bearings spool spindles and gears. You should lubricate lightly however and do not use heavy oil or grease. These can gum up or leave a residue that can inhibit movement of the bearings and other close-tolerance parts. Fine light lubricants such as Rem Oil or Blakemore′s Reel Magic Lubricant are excellent choices. Despite advice you may get to the contrary do not use WD-40 or Vaseline to lubricate any of your reel parts. These work well for many applications but they′re not good for reels. Most manufacturers recommend that you re-lubricate your reel on at least a monthly basis – more often with heavy use. At the very least lubricate everything once during each season you′ll be fishing.
Modern fishing reels are complex pieces of equipment. Take one apart and it looks much like an old-fashioned watch — lots and lots of tiny parts whose purpose is known only to a few select engineers.
Oil bearings. "Clean bearings with lighter fluid. That'll remove all the dirt and grunge from them. After they're cleaned make sure they spin. That's very important because it'll tell you they're clean. Oil them with TG's Rocket Fuel — medium viscosity — one drop per bearing. Again use a toothpick."
Start each trip with a thorough cleaning. Gently rinse each reel to remove salt particles. Don′t loosen the drags yet and don′t use a lot of water pressure either to prevent forcing salt and dirt into internal components. If possible wash reels with warm soapy fresh water to remove salt body oils blood and dirt. Remove the skirted spool (and drag knob if necessary) and clean the underside of the spool and the spindle area. Next rinse the entire reel again with a gentle spray and let them air dry or pat with a towel or chamois. Next loosen the drag knob to remove pressure so the washers don′t become compressed and warped.
Before rinsing tighten down the drags especially on spinning reels. This will help keep water from seeping inside. Hold spinning reels upside down with the drag toward the ground when rinsing giving water even less of an opportunity to get inside the reel.
Any content, trademark’s, or other material that might be found on the simontonauto website that is not simontonauto’s property remains the copyright of its respective owner/s. In no way does simontonauto claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
Copyright © 2018 simontonauto. All Rights Reserved.