Published at Sunday, April 08th 2018. by Evdokiya Lidiya in Fishing Reels.
Egg Carton Parts Holder. If you′re the handyman type who can dismantle your own reel for maintenance here′s a tip you can use. Save an empty egg carton or three and number each compartment. Then when as you′re taking your reel apart place each part in a separate compartment of the egg carton(s) as you go along putting part 1 in compartment 1 part 2 in compartment 2 and so on. When reassembling the reel you can pick up the parts in reverse order and get everything back together right. Of course it′s also a good idea to save and file the schematics that come with the reels you buy and use them when you′re doing reel maintenance. That′s the best way to know what goes where.
Outside of situations like those just keep an eye on your line and change it out when it fades frays or doesn′t feel as supple as it was when new. Like maintaining a reel keeping good-quality fishing line on your reels is key to your success. Tatty line might land a panfish or small bass without problem only to break when you set the hook in that fish of a lifetime.
There are three types of drag systems : 1. Spring and pawl or “click and pawl” systems feature a spring that pushes the prawl into a gear on the reel spool to produce a drag. Spring and pawl is best for light fishing when targeting panfish 2. Disc drag pushes a large-diameter pad against the reel spool′s braking surface. Pressure is applied directly to increase overall control and efficiency. Cork or synthetic materials like Teflon are used in disc drag systems. Cork provides a smoother more consistent pressure and can be easily adjusted. These systems are great for fighting large strong fish 3. Caliper drag systems fall between disc and spring and pawl. A caliper pad pushes against the braking surface of the spool. This friction slows the way the reel spool spins.
Loosen Drag for Storage. Between fishing trips store each reel with its drag loosened. If you leave the drag tightened the drag washers are compressed and you could end up with a jerky or ineffective drag. Reduced pressure on the drag washers helps them last longer in better condition.
To keep reels in prime fighting condition periodic disassembly and cleaning is necessary at least every two years preferably annually. Because of the intricate mechanics this chore is best left to professional technicians at reputable tackle shops or service centers. The reels will be completely disassembled down to the last screw and thoroughly cleaned with ultrasonic dunking the preferred method. For the quickest turnaround have this done in the winter off-season.
Any content, trademark’s, or other material that might be found on the simontonauto website that is not simontonauto’s property remains the copyright of its respective owner/s. In no way does simontonauto claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
Copyright © 2018 simontonauto. All Rights Reserved.