Published at Saturday, April 07th 2018. by Rolande Yolande in Fishing Reels.
Degrease Stiff Reels. If you purchased a new fishing reel and found it a little stiff when casting take it apart and see if you need to remove some of the grease on the gears. Old reels work better too if you clean out gummed-up grease and replace it with a fresh coating of light lubricant. A solvent like Ardent Reel Kleen or isopropyl rubbing alcohol works great to loosen up all grease. A Q-Tip or soft cloth can be used for application.
Each reel is a little bit different but the basics are the same. Here are the elementary steps the Kilpatricks recommend to keep your reel working properly.
If you′ll be stowing your rods and reels for a couple of months – in winter for example – strip the line and leave it off until just prior to your first trip of the new season. That way you′ll know you are starting with fresh line when you begin again.
Oil bearings. "Clean bearings with lighter fluid. That'll remove all the dirt and grunge from them. After they're cleaned make sure they spin. That's very important because it'll tell you they're clean. Oil them with TG's Rocket Fuel — medium viscosity — one drop per bearing. Again use a toothpick."
When you′re on a hot bite or a long-planned trip the worst thing that could happen is tackle failure. Losing a great catch due to something that could have been prevented is annoying. Avoid that problem by maintaining and regularly servicing your spinning reels and you′ll enjoy years of dependable use. Here are some steps to keep those reels in good working order.
Any content, trademark’s, or other material that might be found on the simontonauto website that is not simontonauto’s property remains the copyright of its respective owner/s. In no way does simontonauto claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
Copyright © 2018 simontonauto. All Rights Reserved.